Documentation
Introduction
Welcome to the NX3 Project! An Internet overlay network that uses real world technologies to crea...
Design/Background
In this Chapter you will gain some knowledge on the design decisions and background surrounding t...
Project Background
This project is inspired by the likes of DN42, PeerIX, and EFTI (which faltered in the early stag...
Technologies
This page will outline the technologies in use on the network. Border Gateway Protocol The Border...
Address Space
IPv4 Similar to other pre-existing projects, NX3 will use an RFC-1918 private address network to...
Autonomous Systems
All Autonomous System Numbers (ASNs) will be chosen arbitrarily in the NX3 ASN space. This space ...
Formalities
This chapter explains the formalities of the network, including the registration process.
Requirements
To participate in the NX3 network, there are several requirements: You have at least one route...
Register
In order to get started, you need to create several objects in the NX3 registry: https://git.bret...
Finishing Up
Get Some Peers In NX3, there is no distinction between peering and transit. In most cases, every...
Quick Connect
Are you only looking to quickly connect to the NX3 network? You can use ZeroTier to gain transit ...
Networking Setup
In this chapter, you will gain the know-how to set up wireguard and BIRD to share routes across t...
Service Setup
Run a Service On Another IP
Want to run your service on an IP other than your machine's main NX3 IP? You can do that! All yo...
Caddy
To host websites on NX3, Caddy is highly recommended due to its' easy configuration, and the abil...
ErgoIRC
Want to start an IRC Server, because why not? Go for it! Quick Start Download the latest releas...
Gitea
Want a place to store your source code / configurations you've made? Look into hosting a git serv...